reaClean
reaClean professional
The reaClean professional Wash Check indicator was developed to meet the rising hygiene-monitoring requirements in medical device reprocessing. It documents cleaning parameters — time, cleaning-solution strength and the mechanical action of the water — via two indicators (active and passive). Additional temperature monitoring, compliant with ISO 15883-5, is carried out in the same pass using a reaClean indicator mounted in the supplied stainless steel holder, paired with a reaPoint professional measuring point at 88°C or 93°C for precise, irreversible confirmation that the disinfection threshold was reached.
Available Gaps & Measurement Points
| Reference | Temperature | Individual points (°C) | Individual points (°F) | |
|---|---|---|---|---|
| reaPoint professional | 88°C | 88 for washer-disinfectors validated at 85°C min. 16 min | 190 |
| reaPoint professional | 93°C | 93 for washer-disinfectors validated at higher thermal disinfection thresholds | 200 |
Kit contents and reaPoint professional temperature options confirmed directly on Reatec’s reaClean professional (CPX.03) product page.
reaClean standard
The reaClean standard Wash Check indicator is the same active/passive process-validation indicator as reaClean professional, without a paired reaPoint temperature measuring point. It documents cleaning-solution strength and mechanical wash action for routine, cost-effective cycle validation where a dedicated temperature reading isn’t required.
Available Gaps & Measurement Points
| Reference | Temperature | Individual points (°C) | Individual points (°F) | |
|---|---|---|---|---|
| reaClean standard | — | No temperature measuring point validates cleaning-solution strength & mechanical wash action only | — |
Confirmed on Reatec’s reaClean product page: the standard wash-check indicator ships without a temperature measuring point.
How It Works
Mount the wash-check indicator (and, for professional, a reaPoint measuring point) in the supplied stainless steel holder inside the washer-disinfector.
Run the wash/disinfection cycle as normal — the active and passive indicators respond to cleaning-solution strength and mechanical wash action, and the reaPoint point reacts once its threshold is reached.
The colour change is permanent and irreversible, staying visible after the cycle ends.
Read and log the result using the supplied documentation booklet — no additional device needed.